Last Modified: 11-29-2007 1.6 A
Service Category: Audio/Visual/Telematics Section: Audio/Video
Model Year: 2008 Model: Sequoia Doc ID: RM000002ZX6005X
Title: AUDIO / VIDEO: FRONT DOOR SPEAKER: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for the RH side and LH side.
  • The procedures listed below are for the LH side.

1. REMOVE FRONT LOWER DOOR FRAME BRACKET GARNISH RH DOOR / HATCH: FRONT DOOR: DISASSEMBLY (2008 Sequoia)+

2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG RH DOOR / HATCH: FRONT DOOR: DISASSEMBLY (2008 Sequoia)+

3. REMOVE FRONT UPPER ARMREST BASE PANEL RH DOOR / HATCH: FRONT DOOR: DISASSEMBLY (2008 Sequoia)+

4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH DOOR / HATCH: FRONT DOOR: DISASSEMBLY (2008 Sequoia)+

5. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY

(a) Disconnect the speaker connector.

(b) Remove the 4 screws.

(c) Disengage the 3 claws and remove the speaker.

NOTICE:

Do not touch the cone part of the speaker.

6. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY (for 14 Speakers)



(a) Disengage the 3 claws and remove the speaker.

NOTICE:

Do not touch the cone part of the speaker.